FlightSim Development Group

Hi,
I just purchased Seychelles X from Aerosoft.
When I try to take off from Alphonse, all planes crash every time, without any reason, like if there is a non visible obstacle on the runway.
I know that it is very new software but I think that this should be corrected.
Please inform me if you have a solution to this problem.
Thank you.

When do you crash - on liftoff, at a certain point of the runway or immediately? Maybe you accidentally ran into one of the turtles that can be found on the island.

Hi,
I crash when I approach to this tree that is very close to the runway. I have a lot of space visually, but something is wrong and I can not go through this point, even with the smallest plane. I have to get out of the runway to be able to pass from there.

A tree close to the runway? This should not be the case. Is it possible, you have Orbx trees active? This can lead to unexpected results. You should always disable the ftx mode and Orbx trees if you fly outside any ftx region.

If this is not the case, please provide a screenshot of the tree, if possible.

Hi Thorsten

(nice name btw ;) )

I don't know if it is exactly the same problem but I'm seeing some trees on Alphonse, too. I've ORBX regions installed but no global ftx. The FTX central is set to default.

Screenshot attached.

Cheers and Thanks
Thorsten

There are indeed ORBX trees and ORBX tree sets. Unfortunately, ORBX decided to replace default tree models and sets and (to make things worse) to increase the size of the sets. That leads to unexpected results with other addons.
You might have to ask the ORBX support how to get back to default tree models, but it should be enough to make sure all ftx regions are disabled in the ftx centrall app, and for all regions the "Use ORBX trees" option is also disabled. (not all regions have this option, I know that Australia has it for example)

Thanks for the quick reply, Thorsten. But looks like that did not the trick. Central set to default and Orbx Trees disabled where available as option. So looks like Orbx did some nasty general changes... again

Cheers
Thorsten

That is unfortunate. Some of the trees are replaced default tree models, so there must be some addon that replaced the default autogen library. It doesn't necessarily have to be an ORBX addon, but it's likely. You should contact their support, what to do in order to get back the default vegetation library.

Hi,

I bought two products of "Aerosoft Seychelles X" and "ORBX FTX Global".

Addon "ORBX FTX Global" worked normally.

I established addon "Aerosoft Seychelles X".

There were two problems.

First problem.
Black and brown squares.
http://img713.imageshack.us/img713/5706/5oqd.jpg
http://img823.imageshack.us/img823/1751/fa6d.jpg
http://img12.imageshack.us/img12/8503/1uq7.jpg

Second problem.
Textures flicker.
http://youtu.be/0u4zZ2-7TjI
http://youtu.be/08TaP7AuUgE

It is visible the conflict of two addons.
I ask to help to solve these problems.

---------------------------------------
Asus G750JH:
- Intel Core i7-4700HQ ( 2.4GHz-3.4GHz )
- 32GB ( DDR3-1600 )
- NVIDIA GeForce GTX 780M ( 4GB GDDR5 )
- 17.3" FHD 3D ( 1920x1080 120Hz )
- Windows 7 Pro x64 Rus

Prepar3D 2.0:
- Addon "Aerosoft Seychelles X"
- Addon "ORBX FTX Global
---------------------------------------

By the way.
Addon "Aerosoft Tongass Fjords X" - works perfectly! ;)

Thanks.

P.S.
Excuse for bad English.

The set "FSX SP2" + "ORBX FTX Global" + "Aerosoft Seychelles X" - works PERFECTLY!
The set "Prepar3D 2.0" + "ORBX FTX Global" + "Aerosoft Seychelles X" - the bugs described above are observed.

The first problem managed to be solved.
"try this open "options", on the page "graphics" change "texture resolution" to any other value. Validate open again and turn back to the old value".

Bug - Building


Bug - Light


Bug - Wind

Bug - "FSSD"

"There are shadows"
FSDA-16_Seychelles.png
FSDR-12_Seychelles.png
FSIA-31_Seychelles.png
FSMA-17_Seychelles.png
FSPL-17_Seychelles.png

Bug - "There are no shadows"
FSAL-11_Seychelles.png
FSAS-13_Seychelles.png
FSFA-13_Seychelles.png
FSPP-15_Seychelles.png
FSSC-13_Seychelles.png
FSSF-13_Seychelles.png
FSSR-14_Seychelles.png

Thanks for the detailed feedback. Unfortunately, at this point, we cannot fix issues with P3D V2 yet. There are some bugs in P3D V2, which will most probably have to be solved first by Lockheed Martin (for example the erratic night effects). We hope that they will soon be able to release a service pack or patch. As soon as we have some information about those issues from them, we can start working on patches to make our sceneries work with P3D V2 as well as P3D V1 and FSX.

OK. ;)
Addon turned out excellent and beautiful.
We wait for a patch from LM and from you. ;)